Palfinger PK 580 TEC Truck-Mounted Crane
BuyAvailable for Sale
Enquire About This Crane
The Palfinger PK 580 TEC is made for demanding heavy-duty lifts where control and accurate placement are just as important as lifting strength. It brings TEC-range electronic assistance to a larger truck-mounted crane, with continuous slewing and the LX-6 control valve. Its 55.5 tonne-metre maximum lifting moment is paired with up to 21.2 m hydraulic outreach. With suitable optional fly-jib equipment and mechanical extension, maximum outreach is 33.7 m. PALTRONIC 180 and Power Link Plus are standard, while advanced crane-tip and positioning functions are optional. Available for sale through Gaamben. Enquire about the available configurations and installation requirements.
Palfinger manufacturer specifications
- Model
- PK 580 TEC
- Maximum lifting moment
- 55.5 mt / 544.8 kNm
- Maximum lifting capacity
- 20,000 kg / 196.2 kN
- Maximum hydraulic outreach
- 21.2 m
- Maximum outreach with optional fly jib and mechanical extension
- 33.7 m (with suitable fly jib and mechanical extension, JV1)
- Slewing angle
- Continuous
- Slewing torque
- 5.9 mt / 57.9 kNm
- Standard stabiliser spread
- 7.8 m
- Standard fitting space required
- 1.44 m
- Crane width folded
- 2.55 m
- Maximum operating pressure
- 385 bar
- Recommended pump flow
- 90–120 l/min
- Standard dead weight
- 4,670 kg
Source and lifting limitations
- Manufacturer brochure
- GAAM-CRA-024.pdf — revision 12/2022
- Capacity at working radius
- The maximum lifting capacity, lifting moment and outreach are separate limits. Use the specific boom-version lifting chart in the brochure for loads at each radius.
- Optional equipment
- Maximum outreach with fly jib requires the appropriate optional fly jib and mechanical extension; availability and mounting must be confirmed.
Standard equipment — manufacturer brochure
- PALCOM P7
- FLOW
- PALTRONIC 180
- Control valve LX-6
- Soft Stop
- High Power Lifting System S-HPLS (+15%)
- Power Link Plus
- DPS-Plus at fly jib
- Inclination Angle Monitoring (IAM)
- Slewing Angle Monitoring (SAM)
- Boom Angle Monitoring (BAM)
- Stabiliser Extension Monitoring (SEM)
Optional equipment — not confirmed as fitted
- LEVELING ASSISTANT
- P-FOLD
- SMART CONTROL
- MEMORY POSITION
- High Performance Stability Control HPSC-PLUS (LOAD / GEOM / FSTAB)
- Workman basket — where compatible
- Rope winch — where compatible