Genie GS-1932 Electric Scissor Lift
Enquire About This Machine
Compact, electric and easy to position
Genie's E-Drive system uses sealed AC electric drive motors at the front wheels, with proportional drive and lift controls for smoother positioning. Solid non-marking tyres make it a practical choice for finished floors, while pothole protection, a platform load-sensing system and onboard diagnostics help with everyday operation and checks. The GS-1932 can be driven at full platform height, with a maximum platform height of 5.64 m. Its fixed guardrails, integrated ladder and slide-out deck make it a straightforward choice for regular access and maintenance work. Available for sale through Gaamben. Get in touch for pricing, availability and details of the machine's fitted battery and options.Working height and platform
- Maximum working height — indoor
- 7.64 m
- Maximum working height — outdoor
- 7.64 m (Full Outdoor Height model)
- Maximum platform height
- 5.64 m
- Maximum platform capacity
- 227 kg
- Capacity with extension deck extended
- 113 kg
- Maximum occupants — indoor / outdoor
- 2 / 1
- Platform length (retracted)
- 1.88 m
- Platform length (extended)
- 2.79 m
- Slide-out deck extension
- 0.91 m
- Platform width
- 0.78 m
Machine dimensions and mobility
- Machine width
- 0.81 m
- Machine length — stowed
- 1.88 m
- Machine height — stowed, fixed guardrails
- 2.00 m
- Wheelbase
- 1.55 m
- Ground clearance — pothole guards retracted
- 10 cm
- Ground clearance — pothole guards deployed
- 2 cm
- Inside / outside turning radius
- 0 / 1.80 m
- Solid non-marking tyres
- 31 × 11 cm
- Standard machine weight
- 1,540 kg
- Maximum weight with all options
- 1,658 kg
Operating performance
- Maximum drive height
- 5.64 m
- Travel speed — stowed
- 4.0 km/h
- Travel speed — raised
- 0.8 km/h
- Gradeability — stowed
- 25%
- Raise / lower time
- 33 / 30 seconds
- Tilt sensor activation — front/back
- 3°
- Tilt sensor activation — side-to-side
- 1.5°
- Sound pressure level
- Less than 70 dBA at ground and platform workstations
Power
- Power — flooded lead-acid (FLA)
- 24 V DC (2 × 12 V, 150 Ah)
- AGM battery specification
- 24 V DC (2 × 12 V, 132 Ah or 150 Ah), configuration-dependent
- Lithium-ion battery specification
- 24 V DC (1 × 24 V, 90 Ah or 106 Ah), configuration-dependent
- Hydraulic tank capacity
- 6.1 L
Platform and access
- 0.91 m slide-out extension deck
Adds working space when the platform is extended.
- Fixed guardrails and half-height swing gate
Standard platform access arrangement for the GS-1932 E-Drive.
- Full-height drive capability
Allows driving with the platform raised to its rated maximum height, subject to the operator's manual and worksite conditions.
- Proportional drive and lift controls
Helps operators position and raise the machine with greater control.
- Integrated ladder
Provides access to the platform from ground level.
Drive, safety and service features
- Genie E-Drive
Dual front-wheel sealed AC electric drive motors.
- Solid non-marking tyres
Designed for use on suitable finished surfaces.
- Automatic pothole protection
Pothole guards deploy as part of the machine's operating safety system.
- Platform load-sensing system
Monitors platform load as part of the lift's safety controls.
- SmartLink single-zone controls
Built-in machine controls for drive and lift functions.
- Onboard diagnostics and battery charge indicator
Makes it easier to monitor battery level and check machine status.
- Descent, tilt and motion alarms
Provides operator warning functions during operation.
- Side and rear fork pockets
Provides designated handling points for moving the machine.
- Tie-down and lifting points
Designated points for securing and lifting the equipment.